无扩口导管拧紧力矩对其密封性能的影响

以某型飞机中无扩口液压导管为研究对象,结合飞机液压导管实际安装以及保压工况,利用有限元软件ANSYS中多线性随动强化来模拟导管弹塑性本构模型;对处于不同安装力矩以及恒定压力下的导管连接件进行仿真分析,研究安装力矩对导管管接头处的应力应变以及密封性能的影响,并给出参考安装力矩。构建液压导管安装试验台,利用力矩扳手采集拧紧力矩值并使用液压油车对导管进行加压试验,验证不同安装力矩对导管管接头密封性能的影响。结果表明:导管与卡套之间的胀形区域产生的大变形以及应力集中是引起导管管接头渗漏的主要原因之一;所提出的密封性能仿真方法可以较为准确地模拟拧紧力矩与密封性能的关系,为实际工程中导管安装提供依据。     

基于ANSYS的带簧油封径向力分析

提出一种考虑弹簧初应力的油封径向力有限元计算方法,即通过二维轴对称模型实现带簧油封的径向力计算。该模型中通过圆管来等效油封弹簧,并可以实现弹簧初应力现象的模拟;圆管模型的材料属性由2种状态下(弹簧装配在油封上和油封装配在轴上)弹簧的拉力转换得到,转换关系通过试验与仿真相结合的办法获得,最终实现了带簧油封2种状态下的径向力有限元计算。通过径向力测量仪验证计算结果的正确性,同时发现弹簧所产生的径向力并非百分之百转化为油封径向力。     

锤击法在消除熔丝积材残余应力中的研究进展

锤击法在熔丝积材残余应力消除中具有非常重要的研究价值和学术意义。近年来该方法日趋完善,现已成为消除熔丝积材残余应力的重要方法之一。本文概括综述了消除残余应力的方法,并着重分析了锤击法消除残余应力的国内外研究现状和最新进展。希望能给相关工作者提供参考。     

A model of splats deposition state and wear resistance of WC-10Co4Cr coating

In this research both low temperature high velocity oxygen-fuel flame (LT-HVOF) and high velocity oxygen-fuel flame (HVOF) techniques were employed to prepare WC-10Co4Cr splats and coatings. In situ cutting of WC-10Co-4Cr splats was carried out with focused ion beam (FIB), and a model was proposed to describe how the wear resistance of WC-10Co4Cr coatings was correlated with its residual stress state and the splats deposition state. It was observed that in LT-HVOF spraying process, WC-10Co4Cr splats were slightly melted showing "hill" shape, while in HVOF spraying process, the splats were half melted having the appearance of "concavity". The residual stress of WC-10Co4Cr coatings is determined by the size, melting state, flight speed and temperature gradient of splats. In this paper, the quantitative function formula involving heating temperature and the flight speed of the powder is put forward for the first time to predict the wear resistance of the WC-10Co4Cr coatings. This will provide a theoretical basis for engineering practice and an effective way to save costs.     

An approach to measure infill matric suction of irregular infilled rock joints under constant normal stiffness shearing

Rock joints infilled with sediments can strongly influence the strength of rock mass. As infilled joints often exist under unsaturated condition, this study investigated the influence of matric suction of infill on the overall joint shear strength. A novel technique that allows direct measurement of matric suction of infill using high capacity tensiometers (HCTs) during direct shear of infilled joints under constant normal stiffness (CNS) is described. The CNS apparatus was modified to accommodate the HCT and the procedure is explained in detail. Joint specimens were simulated by gypsum plaster using three-dimensional (3D) printed surface moulds, and filled with kaolin and sand mixture prepared at different water contents. Shear behaviours of both planar infilled joints and rough joints having joint roughness coefficients (JRCs) of 8–10 and 18–20 with the ratios of infill thickness to asperity height (t/a) equal to 0.5 were investigated. Matric suction shows predominantly unimodal behaviour during shearing of both planar and rough joints, which is closely associated with the variation of unloading rate and volumetric changes of the infill material. As expected, two-peak behaviour was observed for the rough joints and both peaks increased with the increase of infill matric suction. The results suggest that the contribution of matric suction of infill on the joint peak normalised shear stress is relatively independent of the joint roughness.     

Gui-A-Gra Attenuates Testicular Dysfunction in Varicocele-Induced Rats via Oxidative Stress,ER Stress and Mitochondrial Apoptosis Pathway

Gui-A-Gra, a commercial insect powder from Gryllus bimaculatus, is registered as an edible insect by the Korean food and drug administration. The aim of this study was to investigate the effect of Gui-A-Gra on testicular damage induced by experimental left varicocele in male Sprague Dawley rats. A total of 72 rats were randomly divided into the following six groups (12 rats in each group): a normal control group (CTR), a group administrated with Gui-A-Gra 1.63 gm/kg (G1.63), a group administrated with Gui-A-Gra 6.5 gm/kg (G6.5), a varicocele (VC)-induced control group (VC), a VC-induced group administrated with Gui-A-Gra 1.63 gm/kg (VC + G1.63), and a VC-induced group administrated with Gui-A-Gra 6.5 gm/kg (VC + G6.5). Rats were administrated 1.63 or 6.5 gm/kg Gui-A-Gra once daily for 42 days. Indicators of sperm parameters, histopathology, reproductive hormones, oxidative stress, endoplasmic reticulum (ER) stress, inflammation, and mitochondrial apoptosis were analyzed to evaluate effects of Gui-A-Gra on VC-induced testicular dysfunction. Gui-A-Gra administration to VC-induced rats significantly (p < 0.05) increased sperm count and sperm motility, Johnsen score, spermatogenic cell density, serum testosterone, testicular superoxide dismutase (SOD), glutathione peroxidase (GPx), catalase, GPx4, and steroidogenic acute regulatory protein (StAR) level. Moreover, pretreatment with Gui-A-Gra significantly (p < 0.05) decreased terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling (TUNEL) positive cells/tubules, serum luteinizing hormone (LH), serum follicle-stimulating hormone (FSH), testicular tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6), malondialdehyde (MDA), reactive oxygen species (ROS)/reactive nitrogen species (RNS) level, glucose-regulated protein-78 (Grp-78), phosphorylated c-Jun-N-terminal kinase (p-JNK), phosphorylated inositol-requiring transmembrane kinase/endoribonuclease 1α (p-IRE1α), cleaved caspase-3, and BCL2 associated X protein: B-cell lymphoma 2 (Bax: Bcl2) ratio in VC rats. These results suggest that protective effects of Gui-A-Gra on VC-induced testicular injury might be due to its antioxidant, anti-inflammatory, and androgenic activities that might be mediated via crosstalk of oxidative stress, ER stress, and mitochondrial apoptosis pathway.     

复杂应力区段煤柱合理留设宽度仿真研究

针对南关煤矿3205运输巷道工作面掘进与支护困难、巷道变形严重且维修频繁的现状,为破解复杂应力情况下煤柱合理留设宽度这一关键性问题,借助FLAC 3D软件进行了应力场与位移场仿真分析。研究结果表明:显著的水平应力场、邻近的采动应力场与劣化的围岩稳定性三重因素的综合作用是制约3205运输巷正常掘进作业的瓶颈。在不同煤柱宽度方案比选过程中,窄煤柱在应对较强水平应力与剪切应力作用时处于劣势。煤柱宽度越大,采动应力场对煤柱及工作面的影响越小,采掘活动更为安全。经过方案比选,最终确立留设煤柱在复杂应力区段的合理宽度为30 m。     

低速机机架贯穿螺栓设计计算分析

采用ANSA和ANSYS联合对某低速机贯穿螺栓进行建模仿真,探讨了不同工况下,该贯穿螺栓的应力水平和应力幅值变化。结果表明:各贯穿螺栓由于安装位置不同,所受应力幅值也不尽相同;并呈现两端大,中间小的特点。为贯穿螺栓的优化设计提供了参考。